BrewVibeLab
Pour OverRecipe testedGuide 6631

Chemex Filter Paper Method: Practical Brewing Guide & Tips

Everything you need to know about Chemex filter paper method, from setup and measurements to troubleshooting, with clear expert recommendations.

BrewingTechniqueCoffee
BrewVibe Research Team

Published 3 min read

Chemex Filter Paper Method: A Comprehensive Guide

The Chemex filter paper method is a testament to the precision and clarity that can be achieved in brewing coffee. This method, while seemingly simple, demands meticulous attention to detail—from the water temperature to the grind size—resulting in a clean, crisp, and balanced cup. Embrace the challenge and elevate your coffee experience to new heights.

Overview & Background

Invented in 1941 by Peter Schlumbohm, the Chemex is a classic pour-over brewer that has become synonymous with elegance and simplicity. The Chemex filter paper method is favored by coffee enthusiasts for its ability to produce a clean, bright, and flavorful cup of coffee. The brewing process involves the use of a Chemex carafe, a proprietary paper filter, and a precise balance of water to coffee grounds.

Key Brewing Parameters / Specs

  • Water Temperature: 92-96°C (195-203°F)
  • Grind Size: Medium-coarse
  • Coffee-to-Water Ratio: 1:16 (50g of coffee for 800g of water)
  • Brewing Time: 4-5 minutes

Step-by-Step Guide

  1. Prepare the Chemex: Rinse the Chemex carafe with hot water and discard. This removes any paper taste and warms the carafe for better heat retention.
  2. Prepare the Filter: Fold a Chemex filter into a cone shape and place it in the carafe. Ensure it is centered and flat.
  3. Weigh the Coffee: Measure out the desired amount of coffee (50g for 800g of water) and grind it to a medium-coarse consistency.
  4. Dose the Coffee: Evenly distribute the ground coffee in the filter.
  5. Pre-infuse: Pour a small amount of hot water (about 50g) over the coffee to wet the grounds. Let it sit for 30 seconds to allow the water to penetrate and bloom the coffee.
  6. Pour Over: Slowly and evenly pour the remaining hot water (750g) over the coffee grounds in a circular pattern, ensuring all grounds are saturated. Maintain a gentle pour-over motion to avoid over-extraction.
  7. Let Steep: Allow the coffee to steep for 4-5 minutes, depending on desired strength.
  8. Decant: Carefully remove the filter and pour the coffee into your preferred serving vessel.

Pro Tips & Common Mistakes

  • Consistent Water Temperature: Maintaining a consistent water temperature is crucial. Variations can lead to uneven extraction and off-flavors.
  • Proper Grind Size: A medium-coarse grind is ideal for the Chemex. Too fine can lead to over-extraction, while too coarse can result in under-extraction.
  • Even Pouring: Ensure the water is evenly distributed over the coffee grounds to achieve balanced extraction.
  • Avoid Over-Extraction: Do not steep the coffee for longer than 5 minutes to prevent bitterness.
  • Clean Equipment: Regular cleaning of the Chemex carafe and using fresh filter paper can significantly impact the taste of the coffee.
Filed underPour OverBrewingTechniqueCoffee

Gear worth owning

Two practical upgrades that make this method easier to repeat. We may earn a commission if you buy through these links.

Affiliate disclosure: prices and availability change. BrewVibe Lab is reader-supported and independently edited.